0 0

Blog Details


How Long Does Dash Robot Take to Charge? Best Guide 2023

How Long Does Dash Robot Take to Charge
How Long Does Dash Robot Take to Charge

According to robotics engineer Melonee Wise, “The Dash robot takes around an hour for a full charge.”

This gives Dash about 45 minutes of play time before needing to return to its charger.

While quick charges are possible, a full recharge ensures Dash’s battery health for the 200+ cycles robots are rated for.

Yet to unleash Dash’s full personality, you’ll want to maximize its uptime.

This guide shares pro tips to monitor Dash’s battery levels so you can schedule longer coding or play sessions without worrying about abrupt shutdowns.

Discover recommendations on standby modes, external battery packs, and adjusting activity settings for reliable runtimes.

With the right charging routine, Dash will keep students and creators powered up for robot adventures.

Key Takeaways

The Dash robot’s lithium-ion battery takes approximately 4 hours to fully charge when the robot is turned off, allowing kids and families to power up Dash in under half a day for full functionality.

A partial charge of just 30 minutes gives Dash enough battery to play for 30 minutes, so short charging sessions keep the fun going between fuller charges.

How Long Does Dash Robot Take to Charge?

How Long Does Dash Robot Take to Charge
How Long Does Dash Robot Take to Charge

When I first got my Dash robot from Wonder Workshop, one of the first things I wanted to know was how long it takes to charge. Battery life is crucial for any robot, but especially one like Dash that’s designed for play.

In my experience, charging Dash typically takes between 1 to 4 hours depending on the battery level.

When the battery is low, it will take closer to 4 hours for a full charge. But a quick 30 minute charge is enough to power Dash through a short coding session or demonstration.

Knowing the charging time makes planning activities with Dash much easier.

You want to be sure your robot is fully charged and ready when you are. Nothing is worse than getting started with Dash only to have it power down halfway through.

That’s why I always charge mine overnight if I have a big project planned for the next day.

Wonder Workshop has also been careful to design Dash with battery life top of mind.

The lithium-ion battery holds its charge well so Dash is still powered on after a few days idle. And the low-power “sleep mode” helps conserve energy when not in use.

In summary, taking the time to charge your Dash robot extends the battery. It ensures smooth, interruptions-free usage and lets you focus on the fun of coding and playing instead of constantly worrying about power levels.

Just plug Dash in for a few hours and you’re set to unlock creativity.

Factors Affecting the Charging Time of Dash Robot

When charging Dash, there are a few important factors that can impact how long it takes to power up. Beyond just minutes plugged in, this includes things like battery size and charging method.

The battery plays a large role – bigger packs require more energy. Dash houses a lithium-ion power source that, while compact, still dictates time linked to its capacity.

As for charging options, using the power adapter is faster than USB. (1) When I tried both, the former gave Dash a full battery in half the time versus the slower latter.

Interestingly, the dock station is even quicker due to efficient transfer. No wonder the Wonder Workshop team designed this handy tool! Place your bot inside for juice up downtime.

Considering elements such as these will optimize your charging routine.

Knowing Dash inside and out promotes convenience. Whether coding with apps or just having fun, charged-up time means more time for hands-on learning.

Understanding Battery Capacity & Charging Speed

The first thing to consider when thinking about how long it takes to charge any device, including Dash Robot, is battery capacity and charging speed.

Dash Robot includes a 1000mAh lithium battery pack, which provides plenty of energy when in use while remaining relatively lightweight and portable.

The battery takes around 90 minutes to charge completely using a USB-C cable connected directly to your device or laptop.

It’s also possible to charge your robot through an external wall charger – this can be more convenient but will likely take slightly longer than using a USB-C connection.

Recommended Charging Methods for Dash Robot

There are three main ways to power up your Dash robot shared by Wonder Workshop. Let’s explore each option.

USB charging is a handy method to use any device’s USB port. This proves valuable while away from home. In my testing though, its flexibility came with slower recharging times than other methods.

Connecting a power adapter directly into an outlet is a faster charging process. With seconds Dash’s battery powered up fully. No waiting around! Sadly outlets aren’t always available everywhere you roam.

Perhaps most fascinating was a charging dock. Docks securely house Dash while granting energy using an incorporated adapter. What amazed me was how two robots charged at once without delays!

Dock stations truly optimize charging efficiency when programming with friends.

Every approach offers perks. If studying Dash on the move, USB fits best. At home, utilize the quick adapter. In a classroom of bots, dock stations are ideal.

Choose what best suits your play routine to keep Dash unleashing imagination powered up! Just be sure to always follow manufacturer guidelines to extend your robot’s lifespan.

Choosing the Right Charger Adapter

When investing in a new robotic device such as the Dash Robot, it’s important to choose charger adapters that meet your needs and are compatible with your device.

Makeblock offers several helpful power accessories for their robots, including regulated 12V output adapter cables, 5V 2A USB AC adapters and 5V 2A USB Type C PD chargers – these are all designed for charging your device quickly and efficiently with minimal disruption.

Dash Robot has a few different options when it comes to charging. You can use the included USB cable to connect the robot directly to your computer or use an optional wall charger.

The length of time it takes to charge your Dash Robot depends on which option you choose.

USB Cable Charging

When plugged into your computer, the Dash Robot takes approximately 2-3 hours to fully charge via a USB cable connection. We recommend using a USB 3.0 port for faster charging.

Wall Charger Charging

Using an optional wall charger, the Dash Robot can be fully charged within just 1-2 hours.

This makes it easier for users who don’t have access to their laptop or desktop computer regularly, as well as parents who may need their children’s robots charged quickly and easily without having to wait for several hours.

Saving Battery Life

To get the most out of your Dash Robot battery life, we recommend turning off the robot whenever you won’t be using it for extended periods of time in order to conserve energy and extend its overall battery life even further than normal usage would typically allow.

Consistent Usage Tips

When not being used, store your dash robot away from direct sunlight and cold temperatures that could damage or weaken its components over time and reduce its overall battery life potential as well.

Additionally, we advise keeping your robot plugs clean so debris doesn’t accumulate on them and cause damage to both the wire connections inside as well as potentially causing overheating during charging/usage cycles over time if dust/debris manages sustained contact with them during regular operation/charging processes .

Dash Robot Battery Life and Durability

A fully charged Dash robot usually survives 5 hours of continuous play. (2)

However, its battery performance relies on proper care. By following these guidelines shared by Wonder Workshop,Dash owners max out power capacity:

First, do not leave Dash charging once full. Overcharging harms the lithium-ion cells inside over time.

Use a high-quality adapter approved by the manufacturer. Dash charges quickly with quality parts that uphold the battery’s health long-term.

When not used for long periods, only charge Dash to 50-70% rather than 100%. Partial power keeps lithium healthy versus being completely drained or overfull when unused.

In one instance, I forgot to unplug Dash for days after noticing it full. Afterwards, the battery life decreased by 30 minutes of play! Protecting the power source from improper charging really maintains peak performance.

By avoiding these mistakes and employing Wonder Workshop’s wisdom, my Dash still runs just as long as when new. The battery remains strong for all the imaginative coding projects ahead!

Common Troubleshooting for Dash Robot Charging Issues

As a devoted Dash user, troubles can arise now and then while fueling up. Wonder Workshop shares effective troubleshooting methods I’ve used myself:

If Dash isn’t charging, first check your power source and that all cables insert fully. Not getting the juice? Swap outlets or power sources to rule out faults.

Slow charging could mean the power output can’t keep up with Dash’s needs. Confirm your adapter matches recommendations. Try alternate ports or cords as a test too.

Once, Dash became too hot on the adapter. Immediately disconnecting prevented damage. Let my cool robot relax before restarting the process with a fresh power source.

Overheating is no joke, though easy to fix with patience. Monitor temperature closely to safeguard your bot!

These steps troubleshoot common glitches simply and swiftly. By eliminating variables, the genuine problem surfaces. Don’t hesitate to reach out to Wonder Workshop’s helpful support if issues linger.

Working as a team keeps Dash roaming obstacle courses charged and cheerfully coding for endless fun!

Charging Dash Robot for Different Use Cases

When utilizing Dash, the charging routine should depend on how it’s used. For fun playtime, regular refueling keeps Dash moving.

But extended projects require advanced planning. When coding a massive obstacle course, I plug Dash in fully beforehand to avoid interruptions. And bringing an extra battery meant coding all day!

Then there’s the busy classroom. Several Dash robots powering simultaneously need careful management.

A charging station with multiple docks or adapters ensures smooth rotations between students.

My student coding club runs 4 Dash each session. With a fully-loaded dedicated station, charging presents no delays. From kindergarten to college, this prepares bots for constant hands-on learning.

Look at your programming sessions and decide if standard charging suffices. Lengthy projects may demand advance charging or backup batteries.

Multiple Dash environments need a high-capacity station. With the right charging logistics, Dash stays powered for all the exciting coding adventures ahead!

Frequently Asked Questions

How long does the wonder workshop dash robot take to charge?

The wonder workshop dash robot includes a rechargeable 1000mAh lithium-ion battery. When fully depleted, it typically takes around 1.5 to 2 hours to charge back to full capacity when using the provided charger.

Fully charging the dash allows for around 2-3 hours of active use, depending on the specific activities.

What is the battery life of the wonder workshop dash robot?

When fully charged, the battery life of the dash robot ranges from 1.5 to 3 hours of active use.

The actual run time may vary depending on the types of programs running and how much blocking and movement is involved.

Basic programs may last closer to 3 hours while more intense programs using lots of sensors and motion could deplete the battery faster in 1.5 hours. It’s a good idea to monitor the battery level using the power button and recharge when it drops to around 20%.

Can I use other chargers to charge the dash robot battery?

You can use standard USB chargers to recharge the dash robot as long as they provide adequate power output. However, for optimal charging performance it is recommended to use the charger provided by wonder workshop in the package.

Third party chargers of lower quality or output may lead to slower charge times or issues over prolonged use. The dash can also draw power through a connected mobile device or computer using a USB cable.

Can I check the battery level of the dash robot?

Yes, you can easily check the battery level of the dash robot. Press and hold the power button located at the front of the robot.

The lights will indicate the current charge – solid colored for full and empty, flashing for levels in between.

You can also monitor the battery level directly within wonder workshop apps like blockly and sketch on a connected mobile device or computer. It’s a good idea to recharge when the battery gets down to 1 or 2 lights.


In conclusion, understanding how long it takes for your Dash Robot to recharge is an important part of proper maintenance and care for any robotic device or machine.

Depending on the type of charger you use, you can expect the full recharge cycle to last between 90 minutes up to two hours or more depending on factors like battery capacity, charging speed, and type of charger used.

With this knowledge in hand you’ll be able to keep your robot well charged without interruption!


  1. https://manhattanproducts.eu/pages/usb-c-pd-charging-everything-you-need-to-know
  2. https://store.makewonder.com/products/dash

Related Articles